1985 Corvette: Chevrolet Corvettes

Chevrolet Corvettes

Plastic Media Blasting

What is plastic media blasting –PMB ?

Plastic media blasting is a process used to for the rapid removal of coatings on materials. The method does not involve toxic chemical strippers, burn off systems, sandblasting, hand or mechanical abrasion methods. In the case of automobiles paint is removed. The process is similar to sand blasting and uses the same type of equipment but instead of sand plastic bits with the texture of large corn meal is used to chip away the paint. Since plastic is a non-toxic compound, the process is eco-friendly.

Plastic media blasting uses high volume air and low pressure to propel the plastic into the paint which results in the paint being chipped away. The process does not create the heat that is generated by normal sand blasting and is therefore safe to use on thin metal. Sand blasting thin metal could cause warping of metal if not done very very carefully. The metal surface when sand blasted is pitted and feels like sandpaper. When plastic media is used to remove the paint the metal surface under the paint is virtually unaffected by the plastic media process. However, rust is not removed by plastic. Loose rust is blown away but the basic rust problem is still there to be dealt with by other procedures.

PMB –plastic media blasting—is less aggressive than sand so it can be used on a wide variety of projects with less concern for damaging results. Fiberglass i.e. Corvettes and boats can have the paint removed. Since the surface (gel-coat) under the paint is relative soft compared to metal, after Paint removal the surface is more like the surface of an orange. Body filler can be removed or left in place depending on the thickness and/or customers' desires.

What is the Chevrolet Corvettes biggest competitor?
biggest competition, local and overseas, price comparison, quality comparison, availbility

Get the answers

1989 Chevrolet Corvette?
Well I was looking around and found this 89 vette at $4,995 I was wodering if this is a good buy it has 200k miles I opened up the hood and revved it didnt stall at all..still what do you guys think?

Get the answers

how much is my 1957 chevrolet corvette gasser and my1996 550 maranello ferrari model worth?
i got this both when i was little and are just sitting in my room i would like to know how much they are worth and the right price i could get them for thanks for the help

Get the answers

what are your favorite classic cars?
my favorites : chevrolet bel air (1955 - 1957) chevrolet pick-up truck (1947 - 1955) chevrolet corvette stingray convertible (1963 - 1967) the coolest looking corvette ever made chevrolet impala ss (1965 - 1970) chevrolet corvette convertible (1953 - 1962) Pontiac GTO (1964 - 1967) FORD MUSTANG ('65 , '66 , '67) Cadilac's (40's , 50's , 60's , 70's)

Get the answers

Is 6th gear in a C5/C6 Corvette an overdrive gear?
Just curious. It seems like the Chevrolet Corvette is such an animal that it would be impossible to max out a 6th gear. Because you can easily go 100 mph in 3rd gear, I am wondering if 6th gear is an overdrive gear and not to be used for top speed?

Get the answers

Chevrolet Corvettes News

GM sketches out order deadlines for 2012, 2013 Chevrolet Corvettes

We've already told you how General Motors plans the honor the 60th anniversary of the

Guardian Angel Motorsports raffling off spaceflight

Aside from the Sunshine State's permanent association with Ferrari-bodied Chevrolet Corvettes and Edward James Olmos's portrayal of Lt.

GRANDAM: Daytona Int'l Speedway January test notes, day 3

Day 3 Roar Before The Rolex 24: Testing Concludes With Chevrolet Corvettes On Top Of Speed Charts #01 Chip Ganassi Racing with Felix Sabates BMW Riley: Joey Hand, Scott Pruett, Graham Rahal, Memo Rojas Photo by: Greg Aleck DAYTONA BEACH, Fla., -- The Roar Before The Rolex 24, the three-day test session for the historic 50th Anniversary of the Rolex 24 At Daytona on Jan. 28-29, concluded on ...

A Le Mans-Winning 1960 Corvette Finds Fame in a Sequel

The 1960 Corvette that won its class at the French endurance race was in Arizona last weekend, where a documentary about the quest to find it was screened.

Gurney and Gurney: Father and son appreciate what it takes to win the Rolex 24 at Daytona

If you're a fan of symmetry, of closed circles, the possibility tantalized: Alex Gurney, 37, gunning to win the 50th-anniversary running of the Rolex 24 at Daytona as his 80-year-old father--Dan, who won the first race, in 1962--applauded from the...

Rolex 24: Starworks Motorsport setting blistering pace as Rolex 24 rolls on

At 10 a.m., five and a half hours from the end of the 50th anniversary of the Rolex 24 at Daytona, stress and exhaustion have begun to set in, largely because of a blisteringly fast pace in both the Daytona Prototype and GT classes.

GRANDAM: Dalziel puts Starworks Ford Riley on Daytona 24H pole

Starworks strikes at Daytona, Brumos nails GTclass pole Ryan Dalziel put Starworks Motorsports’ brand new Ford Riley on the pole Thursday for the 50th running of the Rolex 24 at Daytona International Speedway. Dalziel, the winner of the last Grand-Am Rolex Sports Car Series of the 2011 season, lapped the 3.56-mile Daytona road course in 1:41.119, averaging 126.741 miles per hour in a car that ...

Sinulog kicks off with cars, beauties and calls for peace

CEBU CITY -- As Sinulog 2012 opened, a monsignor appealed for secular fiesta activities to be kept “decent, wholesome” and free of politicking. Msgr. Roberto Alesna, who was the main celebrant in the mass at the opening salvo Friday at the Basilica del Sto. Niño, said he will continue praying that all officials will be at peace with each other.